The True Hop Gate Pump servo is specially developed to work on the rear of your RC Lowrider car to make it pop and bounce! Use with a 10A (20a) BEC set at max. 8.4V.
NOW 180° throw with Radio set at 120%-120%!
Powered by AGFRC!
Fast and Strong!
Specs:
Voltage: 7.4V- 8.4V Do not exceed!
Gears: Super Steel Gears
Bearing: 3 HQ Ball Bearings
Operating Temperature: -15°C – +70°C
Pulse / Frequency: 1520uS/ 333Hz
Operating Speed: 0.053sec/60° @ 7.4V 0.043sec/60° @ 8.4V
Static Holding Torque: 21.0 kg-cm (292 oz-in) @ 7.4V 24.0 kg-cm (333 oz-in) @ 8.4V
Size: 40*20*37.2mm 1.57*78*1.46inch
Motor Type: Brushless
Spline: 25T/ Dead Band Width 2uSec
For Best results:
– To make the rear bounce use stiff shocks depending on the weight you use in the trunk.
– Use longer servo horns and shorter shocks to make the car lay low while still be able to lock up high.
– Always adjust endpoints!! Make sure there’s no binding (humming noise).
NOTE:
– These Gate Pump servo’s are for experienced users only!
– Always adjust the endpionts to make sure there’s no binding (humming noise).
– Let these servo’s cool down in between sessions.
WARRANTY DOES NOT COVER BURNED OUT SERVOS!!
BURNED OUT SERVOS ARE CAUSED BY INCORRECT ENDPOINTS SETTINGS AND/OR THE SERVO HORN GETTING STUCK BY SOMETHING LIKE A LOSE BOLT OR WIRING.
