Tapered Spindle 3/8″ Arbor Hole Right Side Grinder or Motor Polishing Buffing

Free Shipping

Tapered Threaded Spindle is made in the U.S.A. manufactured with close tolerances, runs true without any vibration with optimal performance of wheels and accessories being used.

This Arbor/Spindle is used to hold Soft Wheels with 1/8″ Pin Hole Centers: Polishing Buffs and Felt Wheels, Satin Finish wheels, Wood Hub Brushes… NOTE: DO NOT USE Tapered Spindles to hold Grinding Stone Wheels or Hard Heavy Wheel – IT IS EXTREAMLY DANGEROUS TO DO SO!

Spindle has a 3/8″ arbor hole to work on 3/8″ shaft Grinders, Motors or Polishers.  

The arbor threads are cut to be used on the RIGHT Side of the motor. Spindle has a pair of Allen Head Set Screws to attach to your motor shaft.

Note: Always slightly tighten the front most set screw and then the one closest to the motor. Final tightness should be done after both are equally tight.

Specifications:

• Material: Cold Rolled Steel
• Overall Length: 4-5/16″ – 109mm
• Arbor Body Diameter: 3/4″ – 19mm
• Spindle Body Length: 2-5/8″ – 66mm
• Spindle Shaft Depth: 1-5/16″ – 33.3mm
• Arbor Hole: 3/8″ – 9.57mm for Shaft Connection
• Weight: 3.8oz. – 120gr

Features:

• Precision Quality
• Machining is done by CNC Equipment
• Made of Steel and Anodized Finish
• Allen Set Screws do not protrude above the main shaft of the spindle.    

Spindle is made to be used on a 3/8″ shaft diameter and on the (L)- RIGHT Hand Side of Motor with forward direction.